Efergy E2 Spécifications télécharger pdf (Page 8)

HOW TO CHANGE FUNCTIONS

FUNCTION BUTTON: Press the top FUNCTION button to change the information

displayed from instant to average and to history.

INSTANT

The display unit shows

instant power (kW),

estimated electricity costs

per hour (

/hour) and

carbon emmisions per

hour (kg.CO2/hour).

The LED light will flash

every 6s, 12s or 18s in

the top of the display

indicating the time of use:

- Red: highest cost period

- Green: low cost period

AVERAGE

The information shown is

the average calculated

since the monitor was

switched on for the first

time. It shows daily, weekly

and monthly average

consumption in kWh,

and kg.CO2.

HISTORY

At this mode the monitor

shows consumption of

the last 7 days, last 7

weeks and last 24

months in kWh,

and

kg.CO2.

Time

Date Date

STEP 3. ELECTRICITY COSTS - TARIFF 1

Default price of 15p/kWh will flash. Use UP and DOWN

buttons to change the cost per kWh. Press MODE button

to save your setting. Tariff 2 set up will flash.

STEP 4. ELECTRICITY COSTS - TARIFF 2

Default price of 5p/kWh for Tariff 2 will flash. Use UP and

DOWN buttons to change the cost per kWh. Press MODE

button to save your setting.

STEP 5. ELECTRICITY COSTS - TARIFF 3 & 4

Default price of 15p/kWh for Tariff 3 will flash. Use UP and

DOWN buttons to change the cost per kWh. Press MODE

button to save your setting. Repeat the process for tariff

Example: If you are on an economy-7 tariff which starts at 1am and finishes at

8am, set start time at 01:00 and end time at 08:00. Push the MODE button to

confirm. Select the currency and set the cost per kWh you pay for each tariff,

approx 5p/kWh and 12p/kWh for night and day time rates respectively.

1 2 3 4 5 6 7 8 9 10

Commentaires sur ces manuels

Pas de commentaire

Efergy E2 Spécifications Page 8

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Efergy E2